Entertainment Center Instructions February 2018 Features • Smart 4K TV with Cable and Internet access • DVD Blu-ray Player • Wireless & Wired Microphones • CD Players with Karaoke or DJ • External Systems Connect Computer Display and Audio MP4 Music Player Other TV and DVD Control TV button Power • Power On TV Press Comcast remote TV button then Power Button Comcast box light goes on TV goes on If TV fails to go on Press TV remote power button • Power Off TV Press Comcast remote TV button then Power Button Comcast box light goes off TV goes off If TV fails to go off Press TV remote power button Power • To select TV source: Cable, DVD, Internet use TV remote Press menu button to open options at screen bottom Use left and right buttons to navigate, go left to Source Navigate Up When Sources appear above, press up button on remote Center L R Use left and right buttons to navigate and pick a Source When desired Source is found press center button Return Dn Press down button to get back to options screen at bottom Menu Press menu button to close options at screen bottom TV Connections USB 1 USB 2 Audio Optical HDMI 1-4 RF Ant Connect Box Power Ethernet Power AMP Left Power Right PA System Instructions Examine speakers to ensure they are safely attached Open Credenza doors to ensure equipment does not overheat Turn on as needed TV & DVD, then PA Power Strip, then Power AMP Ensure all devices are powered on Use Power AMP to control ROOM Volume Left and Right Volume Must Match, turn down to 9 o’clock when done If needed see detailed settings in the following pages When done turn off All power including Power AMP CAUTION DO NOT use microphones closer than 15 feet to speakers Microphone Use If no sound go to details • SR 40 PRO 2 Microphone 1 & 2 (use these first) Slide switch up on mic for on and verify light goes on at receiver If light fails to go on or goes on then off replace batteries If needed adjust volume on power AMP Slide mic switch down for off, verify light goes off at receiver • Audio Technica Mic A (use only if needed & see wired mic) Verify Mic A volume is set properly (see detailed instructions) Press button at bottom of mic until light goes on at receiver If light fails to go on or goes on then off replace batteries If needed adjust volume on power AMP Press button again to turn off mic, verify light goes off at receiver • Wired Mic When not using set its volume to 0 or turn off mic switch on Numark If using Mic A then remove wired mic from cabinet & place near users Turn off MICs when done or batteries will fail Entertainment Use If no sound go to details • TV or DVD (turn on TV, if needed DVD, and then PA) Turn down TV speakers to 1, 2, or 3 (too much echo) If needed adjust volume on power AMP • CD 1 or 2 (turn on PA) On Numark select CD 1 and or 2 switch and press play If needed adjust volume on power AMP When done switch CH 1 & 2 to Phono/ Line so TV & DVD work • External device - computer MP players (turn on PA) Find cable quick disconnect near center of hutch Find external device cable near center of hutch Disconnect cable from DVD and connect external device cable If needed adjust volume on power AMP When done reconnect DVD player so DVD works System Configuration TV DVD External 1 Cables Wired Mic 1. TV to Numark: RCA-RCA Quick Disconnect Cable 2. DVD To Numark: RCA-RCA female link (2) RCA-RCA CH1 CH2 3. External 1: RCA-mini stereo male 4. External 2: None 5. Numark to YAMAHA: RCA-RCA RCA-Phone Plug (2) 6. Wired Mic to Numark: XLR-XLR (1) Y-XLR (1) Mic 7. Wireless Mic A to Numark: XLR-XLR (1) Wireless Mic A 8. Wireless Mic 1 & 2: XLR-XLR (2) Numark 9. YAMAHA to AMP: XLR-RCA (2) Wireless Mic 1 AMP Wireless Mic 2 External 2 Speaker L Speaker R YAMAHA Volume Controls USE AMP TO CONTROL ROOM VOLUME Left Right Mic 1 Mic 2 Master Wireless Wired Mic CD1 or Center CD2 or Master Wireless Audio Technica Mic A TV DVD CAUTION -Wired Mic is a source of serious feedback when left in cabinet. Set volume to 0 or switch off or use wired Mic. Yes Wireless Audio Technica Mic A is tied to wired Mic. Volume Adjustments • TV Adjust using Numark CH 1 Slider Usually on at 50% • DVD Adjust using Numark CH 2 Slider Usually on at 50% • Microphone Wired & Audio Technica Wireless Adjust using Numark Mic Slider Usually off at 0 because of wired mic, on is 50% • Microphones SR 40 PRO 2 Preset using YAMAHA Mixer Mic Level 1 & 2 Adjustment not needed Room Equalization Settings • System has some frequency equalization abilities To deal with room and less than optimal installations Current settings must not be changed significantly • Numark Settings: Treble +10 Max Mid about 1 o’clock Bass about 3 o’clock • YAMAHA Settings: High +15 DB Low about 2 o’clock • Room Echo The only way to reduce room echo is to change speaker location Power AMP USE THIS TO CONTROL ROOM VOLUME CH A & B must match: 9 to 11 o’clock Input Stereo CH A & B from YAMAHA Mixer Lift Output Speakers Polarity Must Match Caution: Do Not bridge. This can damage the speakers with excessive power. NUMARK CD Mix 1 Input Mic: Wired & Audio Technical Output: YAMAHA Mixer Input CH 1: TV Cable Box Input CH 2: DVD or external device Treble +10 max Mid 1 o’clock Bass 3 o’clock Adjust so Mic On TV Fader DVD Stereo 1+2 Meters are Mic: 50% Phono Center Phono Master 60% Gain 0 Full Green Ch1: 50% Ch2: 50% For CD1 or CD2 select using the CH1 or CH2 switch NUMARK CD Mix 1 CH1: TV Cable box MIC: Wired & CH2: DVD or External Device Audio Technica Master: YAMAHA Mixer Wireless MICs From From Numark To SR40 PRO 2 CD Mix 1 Power AMP 1/L & 2/R Settings YAMAHA MUST match Mixer PAD 1 Up PAD 2 Up HPF1 Down Red Button HPF2 Down Phantom Up for OFF Gain 12 o’clock High +15 DB o’clock Power on / off Low 2 o’clock Fx1 Down ON Meter Set -3DB all devices Fx2 Down ON Start with TV Mono/ Stereo UP Mic Level 1 2 o’clock Master Volume 3 o’clock Mic Level 2 2 o’clock Headphones 0 Level 3/4 2 o’clock FxReturn Level 11 o’clock Level 5/6 0 Not Used Delay Down, VO. Echo SR 40 PRO 2 Microphone 1 and 2 Goes to YAMAHA Mixer 1/L and 2/R Power on/off Level 1 - 12 o’clock Level 2 - 12 o’clock Level 1 and 2 settings must match On Mute MIC has slide switch, Up is on Off Down is off YAMAHA 2/R If green light does not go on and stay on with MIC on, replace YAMAHA 1/L batteries Turn off MIC when done Audio Technica Microphones A and B Goes to NUMARK CD Mix 1 MIC input Push Power To NUMARK CD Mix 1 MIC has button on bottom, press on press off If diversity A or B light does not go on and stay on with MIC on, replace batteries Turn off MIC when done Audio Technica Microphones A & B Speakers