SPECIFICATIONS PR® 15 Input connections: Two 1/4" phone jacks in parallel Enclosure materials and finish: Injection-molded 1/4" thick polypropylene with textured finish; dark gray color Dimensions (H x W x D): 28.562" x 21.312" x 17" 72.55 cm x 54.13 cm x 43.18 cm Width in rear: 11.5" (29.21 cm) Weight: 42 lbs./19.1 kg Mounting or suspension: Molded-in stand-mounting cup, top and bottom flying point inserts Features: • Two-way sound reinforcement enclosure • 15" heavy duty woofer with a 2 3/8" voice coil ™ • RX14 1.4" titanium diaphragm compression driver • 400 watts program/800 watts peak power handling • Crossover network for driver protection and EQ • High frequency driver protection • 90˚ x 40˚ coverage constant- directivity horn for better off- axis tonality Frequency range (-10 dB, half Transducer complement: • Lightweight trapezoidal space): Heavy duty 15" woofer with a enclosure ™ • Durable plastic injection- 49 Hz to 21 kHz 2 3/8" voice coil, RX14 1.4" titanium diaphragm dynamic molded enclosure Sensitivity (1 watt/1 meter): compression driver • Heavy duty steel grille 97 dB • Molded-in pole mount Driver protection: • Top and bottom flying point Power rating (program): Positive temperature coefficient inserts 400 watts resistor Power capacity (peak): Nominal coverage pattern: 800 watts 90˚ x 40˚ Nominal impedance: 8 ohms SPECIFICATIONS PR® 15 Description Always use all four inserts of a The correct mounting bolt diameter The PR 15 is a two-way sound given group as a set. NEVER use and threads per inch are: 1/4" x reinforcement system consisting just one insert to fly a cabinet! The 20. We recommend the use of a of a heavy duty 15" woofer and a four insert groupings include a top grade 5 bolt. For custom brackets, ™ RX14 titanium diaphragm, dynamic group and a bottom group, but we recommend a 5/16" hole for compression driver mounted on some models have an additional the bolts to allow for tolerances a 90˚ x 40˚ coverage constant- group of four on the rear plane of and adjustment. directivity horn. the cabinet. Maximum enclosure angle from vertical hang: 30˚. 3 + 2 YEAR LIMITED WARRANTY The lightweight-yet-rugged NOTE: For details, refer to the injection-molded plastic enclosure When mounting or flying, you warranty statement. Copies of with molded-in stand-mount cup must use a suitable safety chain this statement may be obtained facilitates portable use for live or wire rope to secure the speaker by contacting Peavey Electronics music or speech sound. A black loop this through the top handle Corporation, P.O. Box 2898, powder-coated steel grille provides and firmly attach to a suitable Meridian, Mississippi 39301-2898. driver protection and a professional structural member as indicated by appearance. a certified structural engineer. The PR 15 speaker system is rated at The recommended range of torque 400 watts program power handling, for the mounting bolt is 3 to 3- and the full crossover network 1/2 lb./feet of torque. DO NOT includes high voltage film capacitors OVERTIGHTEN! If an insert spins, it and high frequency driver protection has been damaged and the cabinet for clear, punchy sound and cannot be flown! excellent long-term reliability. Two 1/4" phone jack input connectors Never transport the cabinet while make daisy-chaining to other mounted on an array bracket speakers simple. or other mounting bracket, this may unduly stress the mounting Caution: Before attempting to inserts. suspend the PR 15 consult a certified structural engineer. The WARNING! (note to structural speaker may fall due to improper engineer) suspension, resulting in serious The end of the mounting bolt injury and property damage. should not penetrate the cabinet Additional speaker enclosures more than 1/2" beyond its surface. must not be suspended below a PR 15, nor should additional weight If this penetration depth is be suspended from one of these exceeded, then the insert may be units. Use only the correct mating damaged or unseated from the hardware. All associated rigging is cabinet, severely compromising its the responsibility of others. the mounting integrity! SPECIFICATIONS PR® 15 PR 15 Input Plate ����� ��������������������������� ����������������������� ����������������� ���������������������������� ����������������� ����������� ������ ��������������������������������������������������� ���������������������������������������������������� ���������������������������������������������������� ������������������������������������������������� ���������������������������������������������������� �������������������������������� PEAVEY ELECTRONICS CORPORATION LIMITED WARRANTY Effective Date: 09/15/2010 What This Warranty Covers Your Peavey Warranty covers defects in material and workmanship in Peavey products purchased and serviced in the U.S.A. and Canada. What This Warranty Does Not Cover The Warranty does not cover: (1) damage caused by accident, misuse, abuse, improper installation or operation, rental, product modification or neglect; (2) damage occurring during shipment; (3) damage caused by repair or service performed by persons not authorized by Peavey; (4) products on which the serial number has been altered, defaced or removed; (5) products not purchased from an Authorized Peavey Dealer. Who This Warranty Protects This Warranty protects only the original purchaser of the product. How Long This Warranty Lasts The Warranty begins on the date of purchase by the original retail purchaser. The duration of the Warranty is as follows: Product Category Duration Guitars/Basses, Amplifiers, Preamplifiers, Mixers, Electronic Crossovers and Equalizers 2 years *(+ 3 years) Drums 2 years *(+ 1 year) Enclosures 3 years *(+ 2 years) Digital Effect Devices and Keyboards and MIDI Controllers 1 years *(+ 1 year) Microphones 2 years Speaker Components 1 year (incl. Speakers, Baskets, Drivers, Diaphragm Replacement Kits and Passive Crossovers) Tubes and Meters 90 Days Cables Limited Lifetime AmpKit Link, Xport, Rockmaster Series, Strum’n Fun, RetroFire, GT & BT Series Amps 1 year [* Denotes additional Warranty period applicable if optional Warranty Registration Card is completed and returned to Peavey by original retail purchaser within 90 days of purchase.] What Peavey Will Do We will repair or replace (at Peavey’s discretion) products covered by Warranty at no charge for labor or materials. If the product or component must be shipped to Peavey for Warranty service, the consumer must pay initial shipping charges. If the repairs are covered by Warranty, Peavey will pay the return shipping charges. How To Get Warranty Service (1) Take the defective item and your sales receipt or other proof of date of purchase to your Authorized Peavey Dealer or Authorized Peavey Service Center. OR (2) Ship the defective item, prepaid, to Peavey Electronics Corporation, International Service Center, 412 Highway 11 & 80 East, Meridian, MS 39301. Include a detailed description of the problem, together with a copy of your sales receipt or other proof of date of purchase as evidence of Warranty coverage. Also provide a complete return address. Limitation of Implied Warranties ANY IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE LENGTH OF THIS WARRANTY. Some states do not allow limitations on how long an implied Warranty lasts, so the above limitation may not apply to you. Exclusions of Damages PEAVEY’S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE PRODUCT, AT PEAVEY’S OPTION. IF WE ELECT TO REPLACE THE PRODUCT, THE REPLACEMENT MAY BE A RECONDITIONED UNIT. PEAVEY SHALL NOT BE LIABLE FOR DAMAGES BASED ON INCONVENIENCE, LOSS OF USE, LOST PROFITS, LOST SAVINGS, DAMAGE TO ANY OTHER EQUIPMENT OR OTHER ITEMS AT THE SITE OF USE, OR ANY OTHER DAMAGES WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE, EVEN IF PEAVEY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. If you have any questions about this Warranty or services received or if you need assistance in locating an Authorized Service Center, please contact the Peavey International Service Center at (601) 483-5365. Features and specifications are subject to change without notice. Features and specifications subject to change without notice. Logo referenced in Directive 2002/96/EC Annex IV Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian • MS • 39305 (OJ(L)37/38,13.02.03 and defined in EN 50419: 2005 (601) 483-5365 • FAX (601) 486-1278 • www.peavey.com The bar is the symbol for marking of new waste and is applied only to equipment manufactured after ©2011 Printed in the U.S.A. 6/11 80305775 13 August 2005 U.S. customer warranty registration. Logo referenced in Directive 2002/96/EC Annex IV (OJ(L)37/38,13.02.03 and defined in EN 50419: 2005 The bar is the symbol for marking of new waste and is applied only to equipment manufactured after 13 August 2005 Meridian, Ms 39302-5108 .O. Box 5108P arranty DepartmentAttn: W Peavey Electronics Corporation Here Postage Place OM:FR